Space Habitats & Infrastructure
Rotating space habitat
A large hollow cylinder or hollowed asteroid spun to give 1 g on its inner surface, containing landscapes, weather and a self-sustaining ecosystem.
In shortRotating space habitat, from 2312 (Kim Stanley Robinson, 2012) and Rendezvous with Rama (Arthur C. Clarke, 1973), is at technology readiness level 2 of 9 (technology concept formulated) at its weakest link. Held back by Rotational artificial gravity habitats and Human physiology under partial and rotational gravity. Science status: consistent with known physics; key effects unproven at scale. Estimated new funding to unlock: $140B–733B.
Hollowed asteroid 'terraria' spun for gravity each hold a distinct biome and fly between planets as transport and nature preserves.
An alien 50 km cylinder spins to produce gravity on its inner plain, with an internal sea and artificial suns.
Closest todayO'Neill/Stanford torus studies (1970s); Vast's planned 3.5 rpm artificial-gravity station (~2035).
Dependency stack
Research TRL 1–3Development TRL 4–6Deployment TRL 7–9
Sort by
- The defining feature; must be large and slow enough for permanent residents
- Structural mass for ~100 m radius pressurized rings or counterweighted tethers
- Spin-up, angular-momentum management and docking at a rotating hub
- Unknown minimum effective g and maximum tolerable rpm for permanent residents
TRL 2- Sets the radius, rotation rate and g-level that structures must deliver
- No long-duration partial-g or rotating facility for humans; ISS has no human centrifuge
- Unknown whether lunar (0.16 g) or Martian (0.38 g) gravity prevents bone loss and visual impairment
- Effects on pregnancy and child development completely unstudied
TRL 2 - Large rings cannot be launched whole
✕3 blockers›
- Reliable autonomous joining (welding, latching) of large flexible structures in vacuum and thermal cycling
- Metrology and control of km-scale structures with low natural frequencies
- Fault recovery without human teleoperation at light-lag distances
TRL 4- Grasping, aligning and joining parts without human hands
✕2 blockers›
- Robot training data at scale
- Tactile sensing and robust hands
TRL 5- Fine force control and slip detection need touch
✕3 blockers›
- Elastomer skins wear out and need recalibration after thousands of contacts
- Wiring and bandwidth for thousands of taxels across a whole hand
- Few large tactile datasets to train manipulation policies
TRL 5 - Generalist perception and planning
✕2 blockers›
- Reliability and calibration over long horizons
- Continual learning after deployment
TRL 7- Training and inference compute
✕2 blockers›
- Grid power and interconnection queues
- Advanced-node chip and HBM memory supply
TRL 8
- criticalDeep-space radiation protectionSeveral tonnes of shielding per square metre of hull for permanent residents
✕2 blockers›
- Galactic cosmic ray shielding mass
- Uncertain biological risk models
plausibleTRL 4- Active magnetic shielding
✕2 blockers›
- REBCO tape cost and manufacturing volume
- Quench detection and protection in large coils
TRL 6
- criticalClosed-loop life supportSelf-sustaining atmosphere, water and food for thousands of people
✕2 blockers›
- Food production closure
- Microbial and ecological stability over years
TRL 5 - Hull and shielding mass must come from space, not Earth
✕3 blockers›
- Anchoring and excavating in milligravity on rubble-pile bodies with unknown cohesion
- Remote assay of metal grade before committing a mining mission
- Low-energy return trajectories and transit times of years
TRL 3- Processing excavated material into water, propellant and metal
✕2 blockers›
- Autonomous excavation in dust and low gravity
- Power for processing at scale
TRL 5- Continuous power for processing, including through the 14-day lunar night
✕3 blockers›
- Radiator mass for MWe-class units
- HALEU fuel supply and launch-safety licensing
- Dust-tolerant, autonomous surface deployment and multi-year unattended operation
TRL 5- Most reactor heat must be radiated away
✕1 blocker›
- Radiator mass per kilowatt
TRL 4
- Autonomous operations far from human crewsTRL 5
- Autonomous excavation at light-minute distancesTRL 5
- Fabricating millions of tonnes of hull, windows and structure in orbit
✕3 blockers›
- No smelting/refining of regolith or asteroid metal demonstrated in microgravity or low gravity
- Process power of ~MW per tonne/day throughput
- Feedstock purity and quality control without terrestrial supply chains
TRL 3- Local feedstock instead of launched wireTRL 5
- Smelting and casting need continuous high powerTRL 5
- Assembling km-scale structuresTRL 4
Who could unlock it
- Across several requirements:
- JAXA Multiple Artificial-gravity Research System 2
Rotational artificial gravity habitatsTRL 2bottleneck
- VastStartupRoadmap targets a 40-crew artificial-gravity station rotating end over end at 3.5 rpm by 2035; Haven Demo flew in Nov 2025 and Haven-1 is set for 2027
- Above: Space Development CorporationStartupDesigning Pioneer and Voyager hybrid stations with rotating gravity rings (up to 0.57 g announced in 2022)
- JAXA Multiple Artificial-gravity Research SystemProgramKibo centrifuge housed mice at 0, 0.33, 0.67 and 1 g; 2026 JAXA-NASA results show 0.67 g is needed to keep muscle fiber type
- Torin ClarkResearcher, University of Colorado BoulderRuns human centrifuge studies (HERD) on adaptation to altered gravity; co-authored 2025 hypogravity sensorimotor findings
Human physiology under partial and rotational gravityTRL 2bottleneck
- NASA Human Research ProgramProgramOwns the human risk evidence base for exploration missions but has no human centrifuge in orbit, so its partial-gravity data remain analog-only
- DLR Institute of Aerospace MedicineGovernment labRuns the envihab short-arm centrifuge, the only facility of its kind, and hosted AGBRESA with NASA and ESA in 2019 and 2020
- Edwin MulderResearcher, DLR Institute of Aerospace MedicineImplemented the AGBRESA protocol, which found 30 minutes a day of centrifugation only partly mitigated 60-day bed-rest deconditioning
- Bonnie DunbarResearcher, Texas A and M UniversityFormer shuttle astronaut who brought a NASA-built short-radius centrifuge to Texas A and M in 2026, able to hold subjects at simulated lunar and Martian gravity for extended periods
Asteroid resource extractionTRL 3
- AstroForgeStartupOdin was lost in deep space after launch in Feb 2025; the 200 kg DeepSpace-2 was completed in 2026 to attempt an asteroid rendezvous
- Karman+StartupAnnounced in Jul 2026 that its first mission targets asteroid Apophis; open-sourced its Prospector mission-design tool in Sep 2026
- TransAstraStartupRunning an investor- and customer-funded 2026 study on bagging a 100 t asteroid and moving it to a stable orbit for processing
- Dante LaurettaResearcher, University of ArizonaPrincipal investigator of OSIRIS-REx, which returned 121.6 g of Bennu sample in 2023
Bulk manufacturing in spaceTRL 3
- ESA / Airbus Metal 3D PrinterProgramFirst metal parts printed in space on the ISS (2024-2026, five samples) from Earth-supplied wire
- Space ForgeStartupForgeStar-1 (launched June 2025) generated >1,000 C plasma in its orbital furnace more than 100 times; ForgeStar-2 aims to make semiconductor crystals
- Varda Space IndustriesStartupOrbital processing capsules with repeated reentries; raised $187M (2025) and a later $250M Series D, though focused on pharmaceuticals rather than bulk metal
- ICONStartupNASA-funded Project Olympus ($57M SBIR, 2022) developing lunar regolith construction systems
Deep-space radiation protectionTRL 4
- NASA Space Radiation LaboratoryGovernment labBrookhaven's 33-beam GCR simulator is the main US ground facility for space-radiation biology; NASA signed a new DOE contract in 2024
- Lisa SimonsenResearcher, NASA HeadquartersPresented NASA's radiation protection strategy (2024), noting that optimized passive shielding cuts GCR exposure only about 15-30%
- Marco DuranteResearcher, GSI Helmholtz Centre / TU DarmstadtHis team built Europe's first GCR simulator at GSI/FAIR, published in 2026
- NASA NIAC CREW HaTProgramStudied a superconducting Halbach-torus active magnetic shield for crewed deep-space vehicles
Autonomous in-space robotic assemblyTRL 4
- NASA Ames ARMADASGovernment labSmall inchworm robots autonomously built voxel lattice structures in ground demos; the project closed out in Jan 2024
- Kenneth CheungResearcher, NASA Ames Research CenterARMADAS principal investigator developing robot-built reconfigurable digital-material structures
- Northrop GrummanCompanyMEV-1 and MEV-2 service satellites in GEO; the robotic Mission Robotic Vehicle from DARPA's RSGS program launched in 2026
- GITAIStartupDeveloping self-relocating IN2 robotic arms for on-orbit assembly and servicing (NASA ISAM State of Play, 2026)
Closed-loop life supportTRL 5
- NASA ISS ECLSSProgramISS water recovery reached 98% in 2023 after the Brine Processor Assembly was added; oxygen-loop closure is still the main gap
- Paragon Space Development CorporationCompanyIts Brine Processor Assembly raised ISS water-loop closure from 93% to over 98% and passed 3 years on orbit in 2024
- ESA MELiSSAProgramDecades-long European bioregenerative loop program; the Barcelona pilot plant reported gas and liquid interconnection of four compartments in 2025
- Francesc GòdiaResearcher, Universitat Autònoma de BarcelonaLeads the MELiSSA Pilot Plant, which runs the full biological loop continuously with a rat crew stand-in
Beyond engineering
- Financing a project with trillion-dollar capital costs and multi-decade payback
- Governance of sovereign-like habitats